For screen reader problems with this website, please call954-351-89859 5 4 3 5 1 8 9 8 5Standard carrier rates apply to texts.

JL Audio® Remote Level Control / Line Driver
JL Audio® Remote Level Control / Line Driver 0

JL Audio® Remote Level Control / Line Driver

Model #: CL-RLC
JL Audio
At a Glance
JL Audio® Remote Level Control / Line Driver with 475 O output impedance and >117 dB S/N ratio
Call for Best Price

People also viewed:

Get to know this product.

Fully Active, 2-channel Remote Level Control / Line Driver with Pass-through Outputs

The Possibilities are Endless...

The CL-RLC is a true, active level control preamplifier which can be used for subwoofer level control or as an audiophile-grade, full-range volume control. The CL-RLC's differential-balanced inputs minimize the likelihood of noise, while its very healthy preamp design delivers up to 7.5 VRMS of unclipped output to your amplifier. Unlike cheap, passive line-level controls, no signal passes through the CL-RLC's control cable and knob. Instead, the control knob only sends volume level signals to the preamp circuit in order to maximize fidelity and minimize the possibility of noise.

Subwoofer Level: By inserting the CL-RLC in-line with any signal feeding a subwoofer amplifier, you can control the subwoofer level from the front of the vehicle using the supplied control knob. Another important feature is a buffered pass-through connection so that you can also pass signal along (without volume control) to a satellite amplifier from the same input channels.

Full-Range Volume Control: Since the CL-RLC uses top-quality active circuitry, its application is not just limited to subwoofer duty. It can be used whenever and wherever you want to have volume control over any line-level signal. For example, you can use it to control a center-channel level, rear channel levels, or even the level of an iPod® input directly to an amplifier. The possibilities are endless and will enable very interesting things to be accomplished in a wide variety of systems.


  • Channel Separation: >80 dB
  • Output Impedance: 475 O
  • Gain Range: 7.5 V RMS
  • Max. Unclipped Output: 7.5 V RMS
  • Frequency Response: 10 Hz - 30 kHz (+0/-1 dB)
  • THD+N @ Rated Output: Less than 0.05% @ 7.5 V RMS
  • S/N Ratio: >117 dB @ 7.5 V RMS
  • Max. Input Level: 4 V RMS
  • Operating Current Draw: 90 mA

Remote Level Control / Line Driver (Module) Dimensions Only

  • Width (W): 3.94 in / 100 mm
  • Height (H): 1.21 in / 31 mm
  • Depth (D): 1.63 in / 41 mm
  • Net Weight: 0.55 lb / 0.25 kg
Useful Documents

Misc. Specs

Manufacturer Warranty2 Year
Depth (in.)1.25
Height (in.)4
WarningProposition 65 Warning for California Residents