For screen reader problems with this website, please call954-351-89859 5 4 3 5 1 8 9 8 5Standard carrier rates apply to texts.
Front Row Theater
954-351-8985
By design, P2 and P5 amplifiers are powerful independent “mono block” amplifiers. Each channel is self-contained on its own glass-epoxy circuit board and heatsink and benefits from an independent power supply. Since there is no common audio path between channels there is a complete absence of crosstalk.
Connector Type | XLR x 2 |
---|
Power On Consumption (watts) | 1800 |
---|---|
Signal to Noise Ratio | 125 dB |
Watts RMS per Channel (4-ohms) | 500 |
Watts RMS per Channel (8-ohms) | 325 |
Depth (in.) | 22.5 |
---|---|
Height (in.) | 9.38 |
Width (in.) | 19 |
Channels | 2 |
MPN | 1512021003 |
Analog Audio(RCA) Input | 2 |
Manufacturer Warranty | 5 Year Limited |
Color Finish Name | Black |
Product Weight (lbs.) | 75 |
Collection | P Series |
Color | Black |
Amplifier Channels | Mono Block |
Available in Store Only
In life we admire “heart.” When we say someone has heart we mean passion, spirit, fortitude. And we applaud it. While the amplifier is the brawn behind every successful music and movie presentation, it is also the heart! Its role is as crucial as that of the speakers in its ability to render delicate musical detail one moment and deliver room-shaking explosions the next. The most exquisite piece of music falls flat without clean, quiet power to sustain it through to its natural, musical ebb. Movie special effects require an inordinate supply of stable, high current power to give visceral credibility to the “special” aspect of each effect! In fact, all truly successful sound reproduction requires “heart.” The heart of an amplifier rests with its design and it is here that P2 and P5 amplifiers reveal their high-end lineage: multi-layered, hand-designed circuit boards with thick copper traces; rugged, independent power supplies with tuned toroidal power transformers for each amplifier channel; fourteen rugged bipolar output devices per channel; custom-designed convection-cooled heatsinks with serrated fins; a “no-fuse” design strategy. And the list goes on.
By design, P2 and P5 amplifiers are powerful independent “monoblock” amplifiers. Each channel is self-contained on its own glass-epoxy circuit board and heatsink and benefits from an independent power supply. Since there is no common audio path between channels there is a complete absence of crosstalk.
Frequency-response channel matching is superb. The musical picture is seamless and exquisitely detailed with a multichannel soundstage that is astonishingly transparent, cohesive and three dimensional.
P2 and P5 amplifiers benefit from our proprietary input topology—a unique departure from the classical differential input stage. Eight low-noise bipolar input devices, hand-matched for superior balance, are configured in a complementary active-load cascoded feedback arrangement. Heat shrink tubing applied around each critical input pair ensures superior thermal tracking.
Designed to reduce distortion, this arrangement not only ensures exceptionally linear response, but also superior bandwidth and superb amplifier reliability.
P Series amplifiers are the cleanest, quietest amplifiers in the industry. Each amplifier channel features two separate and autonomous power supplies fed from separate transformer windings. The amplifiers are thus able to deliver stable, continuous power at maximum output, regardless of the number of channels being driven.
While some amplifiers tend to oscillate when driving lower impedance loads, the P2 and P5 remain perfectly stable under all conditions. If pushed into clipping, the proprietary anti-saturation tracking power supply circuit takes over to ensure a seamless recovery.
Since the use of a regulated power supply in the driver stage removes noise emitted by the bridge rectifier (often heard as an audible hum at 120 Hz and its harmonics), the P2 and P5 achieve an utterly silent noise floor.
Conservatively rated, in a low-profile design, these low-impedance toroidal power supplies—one per amplifier channel—make no sacrifices when it comes to delivering a continuous supply of pure, clean low noise power.
They are shaped to minimize hum while a sequence-controlled soft turn on significantly reduces power line transients and in-rush current during start up, thereby preventing accidental tripping of the circuit breakers.
Depth (in.) | 22.5 |
Height (in.) | 9.38 |
Width (in.) | 19 |
Channels | 2 |
MPN | 1512021003 |
Analog Audio(RCA) Input | 2 |
Manufacturer Warranty | 5 Year Limited |
Color Finish Name | Black |
Product Weight (lbs.) | 75 |
Collection | P Series |
Color | Black |
Amplifier Channels | Mono Block |
Connector Type: | XLR x 2 |
Power On Consumption (watts): | 1800 |
Signal to Noise Ratio: | 125 dB |
Watts RMS per Channel (4-ohms): | 500 |
Watts RMS per Channel (8-ohms): | 325 |